|
|
||||
|
Esthetic Teeth – Cosmetic Dental TreatmentsTo a growing number of people, it becomes ever more decisive to have not only a healthy or stainless, but also an esthetically perfect smile. As a relatively recent field in dentistry, dental cosmetic is build around the notion of uniformly white teeth. People long for complete and evenly built rows of teeth, and the visible part of the oral cavity shouldn’t display any stains or fillings. Since many people suffer seriously from the bad look of their teeth, which frequently affects he human psyche, we take pride in providing you with the most conventional and most innovative ways to enhance the look of your teeth and make them according to your ideal.
1. Bleaching – Whitening of TeethIf external influences, such as coffee, colors, nicotine, or tea, or internal factors, such as natural aging processes, have altered the color of your teeth, you have the chance to whiten your teeth by a method called bleaching. Two variants of bleaching exist. Bleaching in the dental practice: in a longer procedure, a bleaching agent will be applied to the teeth concerned. After that, the area is exposed to irradiation from a specially designed raying device. Through this, the darker elements that are inside of your teeth will be destroyed through the oxidation process. This treatment so far takes two hours, after which the teeth have been whitened. Bleaching at home: the bleaching agent will be applied to a plastic rail, which will then be touches upon the teeth concerned. This rail can be worn overnight to allow the bleaching agent to effectuate its active elements. The entire procedure takes about a week for accomplishment. As it is with other treatments by using foreign materials, these two methods of whitening teeth pose some risks to health. Complications may occur, for instance, when the bleaching agent has been accidentally swallowed, which would irritate the gastric mucosa. But also the oral mucosa and event the gingival tissue may become affected through this. It is therefore necessary to consult a dentist prior to a treatment with bleaching agents. 2. Veneers – Ceramic Veneers for the Visible Part of the DentureIn dentistry, veneers are thin layers of restorative materials, such as ceramic. They are bonded to the cutter or eye teeth that may have been fractured or discolored. Veneers may consist of composites, synthetic materials, and ceramic. The dentist differentiates between the processing methods of veneers made up of composites, on the one hand, and those consisting of ceramic or synthetic material. For veneers made up of ceramic and synthetics are fabricated in the dental laboratory and later simply bonded to the tooth by the dentist in the dental practice. A veneer made up of composites, however, is manufactured during the session at the dentist’s office and will be placed to the tooth immediately afterwards. As a rule, dentists tend to prefer ceramic veneers as they can be better adapted to the color of the adjacent teeth and feature an excellent biocompatibility. What Are the Conditions for the Use of Veneers?
Using veneers makes particular sense when the existing teeth are no longer corresponding with the esthetic demands of the owner. In cases where bleaching has not yielded much results, veneers might also be a good choice for those looking for a healthy smile. The dentist is also likely to recommend veneers as and alternative to crowns. Veneers are also used to correct poorly adjusted teeth or easily noticeable tooth gaps. Because of its thin layer of dental restorative material, and unlike crowns, veneers do not cover the entire tooth but only the part of tooth concerned. How do dentists bond a veneer to the tooth? Similar to dental reconstructions after fractures, veneers take advantage of the latest in adhesive technologies. Through this, the fixing procedure of the veneer yields extraordinary results. The actual treatment takes about 45 minutes. Surveys show that allergic reactions due to the introduction of these foreign materials are extremely rare. If the job of the dental technician is well done, veneers are very enduring and easily hit the 15 years mark or more. 3. Composite Inlays – An Esthetic Alternative to Metallic RestorationsComposites, also called synthetic materials, are advanced dental filling materials, which offer esthetically and lastingly satisfying ways of filling dental cavities. These composites consist of tiny ceramic particles, which are bound by the synthetic part of the material, so as to allow for a plastically shapeable mass, similar to plasticine, which enables easy modeling. After placing, these composites start a hardening process that is rendered possible by their exposure to ultraviolet light. In order to make composites processable, the dentist needs to cauterize the dentine and the dental enamel. The cauterization process disposes of the smooth surface of the tooth and helps the composite filling to adhere enduringly to the dentine. This is because of the development of innumerous, small and microscopic pores. They are needed for the composite inlay to adhere to the dentine or dental enamel. The pores ensure the anchoring of the inlay with the entire contact surface and facilitate the concentration on the dental cavity alone. As soon as the dentist has cauterized the dental material as therefore prepared and conditioned the tooth for the treatment, small and manageable portions of the composite filling can be placed into dental cavity. Each of the portions will be hardened before a new portion is inserted. As a result, this method requires the insertion of the composite material in the cavity to be done layer by layer, until the cavity is filled. Since composite materials shrink during the hardening process, the dentist has to work very diligent and with great care, because only this would close the cavity and have some of the composite left for the finishing part. Since this excess filling material is not on a level with the chewing surface, but a bit higher (or lower, respectively), the grinding-in process can start as soon as the material has completely hardened. This is no easy task as the composite closely resembles the remaining tooth in color and surface structure. It requires therefore great skills, a good eye, and patience on the dentist’s side to see where the composite ends and the dental substance begins. Every patient is well advised to choose a dentist who is an acknowledged expert on the case and has sufficient experience in the field. 4. Ceramic Inlays and Ceramic Crowns – The Most Lasting and Esthetically Satisfying Dental FillingCeramic inlays are fabricated by using impressions of the tooth concerned. The dentist determines the color of the remaining teeth and imparts this data to the dental laboratory. Against other dental fillings, ceramic inlays have the advantage of being invisible after the treatment perfectly replacing lost teeth. Other than dental inlays made of gold, or partial crowns, ceramic inlays do not necessitate the removal of healthy dental substance. If older fillings are leaking, or larger damages to the tooth require immediate action, some dental substance will have to be removed to make room for inlays. This is particularly true for cases of caries. Similar to gold inlays, ceramic fillings could last more than 10 years. However, though ceramic inlays and partial crowns made of ceramic may provide the patient with the esthetically most satisfying result, but it may also strain his or her budget. Fillings made of ceramic are a better choice than synthetic materials if the extent of tooth decay has increased. The adaptation of the inlay according to the color of the remaining teeth enables ceramic fillings and veneers to meet patients’ demands for invisible fillings. Dental treatments of existing ceramic fillings often pose problems to attending dentists as they cannot tell ceramic inlays, ceramic partial crowns, and ceramic veneers from the surrounding, natural dental substance. As already suggested, two sessions at the dentist’s practice are required to get this treatment done. During the first stage of dental treatment, the dentist cleans and roughens the concerned tooth. Once done, an impression is taken from the dental cavity or surface. This impression is provided to the dental laboratory for fabrication of a ceramic inlay. The dental technician matches exactly the color of the inlay with that of the remaining teeth in the course of the procession. The second session at the dentist’s office is reserved for the adhering of the ceramic inlay to the tooth. Since these procedures necessitate maximum concentration on the dentist's part, it generally takes more time than the placing of gold inlays or partial crowns. 5. Porcelain Crowns and Full Ceramic Crowns – Just Like Own TeethIn the past, dentists recommended platinum or gold to fill dental cavities or tooth spaces. But today, they would rather prefer to use porcelain instead. Porcelain crowns cannot be distinguished from own teeth, do not fracture, and cause no allergic reactions. Porcelain crowns consist of zirconium oxide, a material closely resembling own teeth. As a rule, dental crowns are required in cases where the decay of dental substance is in such an advanced stage (through caries or dissolution) that the dentist is forced to forego placing inlays or fillings. The dentist's recommendation as to the placing of either a porcelain crown or a partial crown largely depends of the degree of destruction of the dental substance. For their restorative dental treatments, dentists particularly rely on synthetic crowns, crowns made of metal compounds, and dental crowns consisting of metal ceramic. Ceramic crowns have not been used to date as their lack of breaking strength may lead to early damage of the material. Recent scientific research has led to the application of zirconium oxide as an alternative to ceramic materials. Through the introduction of this effective material, porcelain crowns and full ceramic crowns offer even better longevity than the so far used gold inlays and crowns. Other advantages of porcelain crowns and full ceramic crowns are their constituent elements, namely porcelain, which do not elicit hypersensitivities, and their perfect match as to the color of the surrounding dental substance. For that reason, dentists recommend porcelain crowns and full ceramic crowns for front teeth and back molars. Compounds consisting of porcelain and zirconium oxide are as well resistant to the masticatory pressure as those containing metal elements. If the dentist is a master of his trade, a porcelain crown or full ceramic crown won’t be inferior to own teeth in terms of color, light transmission, the required strengths and firmness, and the different individual sensations prevalent in the oral cavity. It should be noted, that porcelain compounds consisting of zirconium oxide features basic characteristics dissimilar to restorative material made of metal compounds. The material is considerably lighter and transmits the alternating temperatures caused by air, food, and drinks to the dental nerves, evoking real-live sensations. Porcelain crowns and full ceramic crowns require more elaborative work on the dental technician’s part than would be the case with metal crowns. This is because of the dental lab’s necessity to mill, burn, and compression-mould the single layers of zirconium oxide for the porcelain compounds. Zirconium oxide is available in different shades of white. The eventual color of the restorative material is selected by both patient and dentist. Porcelain crowns and full ceramic crowns may easily reach longevities of 30 or more years, provided the patient has observed the necessities of dental hygiene. 6. Dental Implants: A Must for Your Well-Being and Esthetic DemandsDental implants are made for replacing decayed dental roots. In most cases, the dental implant consists of titan compounds or ceramic restorative material. Dental implants constitute not only the basis for artificial teeth, but also provide bridges and prostheses with anchor points to cling to. Placing of Dental Implants The jaw is subject to a profound and comprehensive examination as to its dimensions by means of panoramic X-ray photograph, before the dentist is able to place the dental implant a its designated position into the jaw bone. In cases of inflammations of the gum, or if the existing osseous substance is not sufficient, the procedure of dental implanting will not take place. Particularly in older patients, the jaw bone of the rearmost upper jaw is often lacking strength or has already degenerated. In order to proceed with the implanting of the artificial teeth into the jaw bone, this state would require dental restorative measures, especially redevelopments of the osseous substance and structure. The reinvigoration of the jaw bone can be accomplished trough the transplantation of the body’s osseous tissue. In dentistry, this is called sinus lift, or lift of the maxillary sinus This procedure allows the lifting of areas of the jaw bone through the transplantation of body bone tissue or artificially generated bone substance. If the dental implant is meant to replace a single missing tooth, patients would have to budget some extra waiting time. The gap in the jaw bone would take some time for healing and strengthening. Busy patients may choose instant implants instead. This would allow them to have an immediate implantation of the dental replacement in cases of suddenly lost teeth, but it would also increase the risk of loosing the implant. Once the dentist has painstakingly cleaned the patient’s oral cavity, a needle is injected to numb the tooth. Fearful patients may receive general anesthesia if they want to and a anesthetist is present. After that the dentist drives a hole into the jaw bone to prepare the seat of the dental implant. If the cavity in the jaw has reached the planned diameter and location, the dentist can place the dental implant to its designated location. Depending on type of dental implant, it’s either screws that keep the implant in its position, or simply a plug-and-socket connection. There are innumerous variations of implants, each of them adapted to the different sizes and shapes of human jaws. Wide, leaf-like dental implants, screw-like, conus-like, and implants similar to a cylinder are the most common. As a rule similar to anchors, the deeper the dental implant is fixed in the jaw bone, the better its stability. As soon as the dental implant has been placed, the laid bare gingival tissue will be sutured. The bone tissue, which surrounds the dental implant, starts firmly enclosing the implant after the operation. Dentists call this procedure osseous integration, which takes between 3 months and a half a year. After the healing phase, the part of the denture that doesn't belong to the actual implant is fixed upon the artificial root. This could be a fixed prosthesis, a dental bridge, or an individual crown. In order to anchor a multi-unit bridge, the dentist utilizes a special connector. This connector is fixed upon several implants and ensures that the bridge remains in position. Compared to removable prostheses, fixed dental bridges clearly offer some benefits for patients. Longevity is decisively better when using implants, than when applying fixed prostheses. 10 years and longer is really realistic. Also the bite, that is, the force applied to the teeth during mastication, is stronger than in removable prostheses and shrinking processes of the bone substance of the jaw are virtually not taking place. Neither during dental hygiene, nor during speaking and food intake will the implant be recognized as an irritating foreign element. Disadvantages of Dental Implants Of course, no benefits without the disadvantages, this goes for dental implants as well. For instance, dental implants may cause a feeling of numb jaw bones, the gingival tissue, or around the lips after dental treatments. In rare cases, the tongue may be infected. Further, inflammations, damages of nerves, and even the rejection of dental implants through the jaw bone tissue cannot be excluded from happening. In the event the dentist drives the trepan too deep into the jaw, injections of the maxillary sinus may occur or the patient suffers great pain. Patients with Diabetes mellitus might experience post-operational complications. Moreover, implants are not the most affordable way to replace decaying tooth. It is therefore worthwhile for the patient to invite a number of offers (from other European countries). Patients will have to pay for the implantation, even if the operation has been a complete disaster, unless there is evidence of grave error in treatment on the part of the dentist. Therefore, the attending dentist should have sufficient knowledge and experience regarding the implantation of dental replacements. Particularly after the placing of implants, the patient is well advised to observe the basic rules of dental hygiene, so as to avoid getting problems with periodontitis. Also cases of a special inflammation, called peri-implantitis, have been reported. Peri-implantitis is one of the least pleasurable and most complicated problems of all implantations and is likely to end with the loss of the implants. Nicotine may reduce the longevity of the dental implants. It seems expedient to completely forego the consumption of tobacco. As a matter of course, post-implantations are subject to regular visits at the dentist’s office. 7. Professional Dental HygieneDental calculus (or toothing stone) and plaque are considerably damaging the tooth. These yellowish and unesthetic accretions are the perfect ground for millions of bacteria. These parasites help generate periodontics and caries. To prevent this damaging of dental substance, people should visit their dentist at least two times a year. Particularly the gingival margins and the accretion of half-digested food there offer the perfect environment for micro organisms. Here they have enough to live and reproduce. If the patient does not care about the cleaning of this stomping ground of micro organisms, minerals from the saliva will be added to it. These are exactly the preconditions for the development of dental calculus. The consumption of tobacco, coffee, and tea is responsible that this hardened mass of dental calculus is taking on a yellowish or brownish color and those patients learn to keep their mouth closed and get out of a habit of smiling. This obvious and unpleasant aspect is only one part of a number of subsequent problems. That is, dental calculus and plaque are not only considered to be esthetically unsatisfying, but are also causes for cares, halitosis, inflammations of the gingival tissue, and periodontics. At this point, even the reintroduction of profound dental care comes a bit late. These accretions cannot be completely removed by intense flossing of the teeth. Molars and wisdom teeth can hardly be reached by the toothbrush or dental floss; and pockets of gingival tissue and interdental space are even harder to clean. Therefore, despite the most intense cleaning methods possible, it proves to be very hard to reach these difficult to access spaces and keep them neat and clean. This is exactly the reason why patients should consult their dentist at least two times a year and have their teeth professionally cleaned by skilled experts. It is particularly dental hygienists and assistants for prophylactic measures that are charged with the dental cleaning at the dentist’s office. Following an interviewing of the patient about their methods and ways of dental care, which is conducted by the attending expert for prophylactic measures, the patient will be introduced into the single steps necessary for a professional cleaning of teeth. The dental assistant is the examining the oral cavity in order to detect potential damages of the gingival tissue or dental substance. This is meant to prevent any harm form happening inside the mouth. A measuring devise will now probe the depths of the gingival pocket. This is all it takes to be ready for the prophylactic cleaning of the teeth, and the professional effort can begin. What kind of tools will be used in this process depends on the condition of the denture. Dental calculus, for instance, is done by loosening and blasting the accretion by facilitating ultrasonic cleaning equipment. Colored remnants of nicotine, tea, and coffee will be removed by abrasive blasting through high-pressurized jets of water. Subsequently, the dental assistant scratches the calculus out of the gingival pockets, using abrasors and small scrapers. Following that, dental floss and brushes are applied to remove the softer and loosened parts of the accretion. Once this partly unpleasant procedure is over, the patient’s teeth will be subject to a polishing procedure. Brushes with borders of rubber and specially designed polishing paste, as well as the coating with a fluoride gel make the dental enamel stronger and provide the patient's teeth with the smooth, shining, and white surface they desire. Since national health insurance companies would cover only the removal of dental calculus but dental practices offer a variety of other prophylactic treatments, patients are best advised to ask the dentist about the coverage of their services. This is also because the price span of services offered by dentists is worth investing time into the search for the best value for your money. Don’t hesitate and ask in advance what you will get for your money. 8. Dental Jewelry – All the Rage in Modern Dental EstheticsFrets at the visible, front teeth in the form of jewelry, metals, or ceramics, which are fixed to their position by using state-of-the-art adhesives, have become all the rage. As we also know from pictures showing primitive people of bygone days, tooth jewelry is an increasing trend in civilized, post modern societies. Then and now, they are meant to communicate with the other. Basically being a fashion accessory, dental gems are obviously meant to make you look and feel more individualistic and distinguishable in a mainstreamed society. Gems, pearls, porcelain, or gold foils are fixed to the front teeth or to artificial teeth by facilitating special adhesives. There is a wide array of different forms and shapes available on the market. For instance, there are thin layers of gold, gemmed with rubies, diamonds, and sapphires. Foils of gold braided with different motifs. Valuable jewelry is blinking magically. Small pictures, or dental tattoos, are bonded to the teeth and are intended to stir reactions in the other person. In facilitating and designing dental jewelry, the patient’s fancy is given full scope. Tooth gems can be cost-effective rhinestones, or precious metals such as gold, silver or platinum. Even diamonds and other gems are already beautifying all kinds of cutter teeth all around the world. You will find in particular a great variety of possibilities of designing dental jewelry among those fabricating metallic adornments. Those manufacturing the dental jewelry take care that their dental products could easily be stuck onto the customer’s teeth. Dental gems made of metal usually have a smooth surface. The adherent of gems, to compare with, has been roughened for better sticking characteristics, and most of them are built into a socket of noble metal. In choosing the most appropriate adhesives, one has to make sure that they find their purpose in general dentistry as well. Only through this, patients can avoid infections in the oral cavity. Bonding dental jewelry onto the front teeth does naturally not cause any pain. In order to cement or stick adornments to the teeth, composites are frequently used for this kind of beautification. Composites are adhesives that are much in use by dentists who place fixed braces into their position. Dentists and dentistry call this underlying method multi-band-technique and / or lingual technique. The tooth the jewelry will be stuck to, needs careful cleaning before any jewelry or other items can be placed at them. In order to prevent from becoming caries, the surface of the indicated tooth will be polished with a fluoride-containing paste and then roughened for a better grip. A special acid is applied for this purpose. The tooth is exposed to ultraviolet light to allow for a hardening of the adhesive. The entire procedure of bonding dental jewelry to teeth takes about 30 minutes. Longevity of the tooth gems depends on the materials used. Research has shown that a period between 12 months and 2 to 3 years are realistic figures. Injuries an damages to the teeth are virtually not occurring when dental jewelry is applied. But this requires careful observation of the rules of dental hygiene. Otherwise, caries may occur below the dental gems, and at the edges of them caries can easily develop. During the first weeks after the bonding of dental jewelry, the teeth concerned might display a heightened sensitivity. Dental adornments that have been stuck onto the teeth can be removed without difficulties. To this end, the dentist would follow a procedure identical with the removal of dental calculus. After the removal, the tooth should be treated with a fluoride gel and carefully polished. This is meant to effectuate the closing of tiny pores thus preventing bacteria from clinging to the tooth. 9. Mandibular Distraction Osteogenesis for the Optimization of the Malposition of the JawMalpositions of the jaw lead, in the long run, to massive distortions of health and to chronic complaints. Particularly the jaw joints can be affected and teeth could be lost in effect. Dental medicine and oral dentistry have developed a procedure to help patients operationally with malpositions of the jaw. People who suffer from a malposition of the jaw since birth or an accident, can be offered relief. The method at work relocates the jaw into its proper position through a reshaping of the jaw bone. No foreign material will be introduced to the body, but exclusively own bone tissue taken from some other part of the body. The past has offered almost no ways to correct the malpositioned jaw. But today’s state-of-the-art technology allows for a correction of the jaw bone, called mandibular distraction osteogenesis. The mandibular distraction osteogenesis is a scientifically approved surgical method to distract or lengthen the bone structure in the malpositioned jaw, so as to lengthen or revitalize the jaw. Oral surgeons rely on the self-healing capacities of the human body. Here, two parts of jaw bone will be dissected and, slowly and step-by-step-like, distracted. Through this method, new bone substance develops, called callus. The patient is required to participate during the procedure. Between the two fractured parts of bones, which will be distracted, a distraction devise is placed from time to time. It is the patient’s part to readjust and activate this devise on a daily basis. The development of osseous substance in the upper and lower jaw is accomplished by the distraction of the jaw ridge. Particularly in cases where people suffered damages as a result of an accident or very early loss of teeth this method is perfectly designed to restore the jaw bone and make it ready for the planned placing of prosthesis. For the field of dental implantations, the method of distractions osteogenesis provides the implants with considerably more grip. Not just patients suffering from a malposition of the jaw by birth can now rely on the promise of an esthetic enhancement of their facial appearance. Even patients with tumors and those who had an accident are on the oral surgeon’s list. Furthermore, this procedure helps patients who have lost half of their face to an accident with a restoration of their appearance through a three-dimensional stretching of the existing structure. However, everyone should be aware about the long period of time necessary for building new bone structure through the distraction osteogenesis. The entire operational and post-operational procedure may take months, even years in severe cases, before the newly developed bone substance has reached the firmness and stability necessary to fulfill its functions. Since distraction osteogenesis poses fundamental risks to muscles, sinews, and nerves, the process itself cannot be accelerated at the present state of research. Medical dentistry and oral surgery is elaborating of a solution to this problem and to final shorten the procedure time. 10. Braces and Brackets to Correct Irregular Teeth AlignmentA brace or bracket is a devise used in medical dentistry and for patients. Braces correct poor alignments of teeth. Braces are also applied to correct malpositions of the jaw and to readjust the distances between certain fixing points in the muscular oral area. Every dentist should be able to treat patients with braces or brackets. There is, however, a specialized field on oral surgery, which trains oral surgeons on how to use braces and brackets. Children, particularly those aged 10-15 years, widely enjoy wearing braces. This is because of the still prevalent periods of growth. The actual treatment with a brace may easily take up to five years. However, he treatment period itself is always dependent on the extent of the poorly aligned teeth. In order to get the best results possible, both dentist and patient are advised to cooperate and discuss matters thoroughly. The patient is required to observe the regular checkup dates at the dentist’s practice and follow the instructions of the oral surgeon. For instance, these would be about the readjustment of the brace, the adherence to the exact wearing time, and surely a sufficient oral hygiene. Removable Dental Braces Since these braces or brackets are removable and designed for children, they are available in a wide range of colors. For removable brackets, it is important to adhere to the prescribed wearing time. Over the course of a single treatment with removable braces, several of them will be used for only one patient. Fixed Braces Recent advancements in dental medicine allow the correction of jaw bones at every age by facilitating fixed multi-band appliances. A healthy and stabile jaw bone is the requirement, however. Generally, 3 to 5 days after the first insertion of the fixed brace, pain may occur, rendering the intake of food nearly impossible. Also, aphtae (painful, inflammatory erosions of the mucosa, the gingival tissue, and the oral cavity or tongue) may develop. In some instances, patients suffer from an inflammation of the oral mucosa. Particularly the fact, that the fixed brace has to be worn over an extended period of time an without interruption, may sometimes lead to unanticipated complications. Particularly those involved in sports or other activities that require public appearances may feel embarrassed by the wearing of fixed braces. 11. Invisalign, Correcting Teeth with Invisible BracesInvisalign, a tradename, appears to be the best orthodontic method available for correcting teeth in a gentle and unobtrusive way. In using Invisalign for dental correction, the dentist applies a variety of removable and transparent rails, which help correct dental misalignments without necessitation the usual wires and metal aligners. The invisible and removable braces of Invisalign consist of a number of invisible and transparent aligners. These invisible aligners can be compared to very thin skin. This thin skin-like aligner is put over the tooth and corrects it by applying pressure into the desired direction. For that reason, Invisalign braces necessitate several readjustments of the invisible appliance. Every readjustment indicates the completion of 0.25 mm of correctional distance. If the twelve-year molar is completely grown up in adult patients, the Invisalign therapy, invisible braces for the correction of poorly aligned teeth, will be perfectly suited. The highly technical, orthodontic treatment with Invisalign is gentle to the teeth and appears to be seminal for the future of orthodontics and the correction of misaligned teeth. Facilitating a computerized, graphic simulation, a complete picture of the use as is of the teeth can be created. The latest in stereolitographic technology displays how the teeth will be repositioned at every step of the treatment plan, until the teeth are straightened. Invisible and personalized aligners will be fabricated for every single step of the treatment, requiring replacement at intervals of 14 days. During this period, the teeth are subject to a continuous force applied in a way to move them gradually into the planned direction. So alignment follows alignment until the preferred goal, the previously calculated correction effort, will be accomplished. Depending on the extent of the dental misalignment and the wished for result, the Invisalign treatment may take something between 10 to 18 months. Benefits from a Treatment with Invisalign Braces</p>
Patients should assure themselves of the fact that dentists and orthodontists, who are offering Invisalign with its discreet aligners, are able to proof their comprehensive training of this new technique. Only this minimizes the risk of running into an inexperienced dentist who could make out of your invisible brace a big disappointment. |
|||
| Disclaimer | Advertising Info | Advertising Terms | Affiliate stuff | Affiliates | ||||
Zahnarzt Planet
Sitemap
